IP Searcher 2.2

IP Address Searcher is a powerful IP Address Search tool that helps you to search IP address, list all IP Address on your network, ping a host, trace IP, get MAC information, search a ip geographic location.
Features:

1).List ALL IP address of PCs on network.

2).Get IP address of a specific host or a website.

3).Get host name of a specific IP address.

4).PING a specific host or a website, display it’s geographic location and IP network segment.

5).Trace a specific host or website, and display the location of routes and display it’s location and IP network segment.

6).Get ALL netcard(MAC) information on your computer.

Download Here

Find MAIL SENDERs IP

Emails are very important part of our communication system
We think that we know everything about emails.

we know how to compose email , how to attach a file , how to send it to others ,How to receive emails from others and many other things.This is all we know about emails.But this is not end of it .When you receive or send emails many other things are sent with it.
At this time when Email is progressively used for business and for many purposes, not to mention it is being used for phishing and other malicious intentions. It is of utmost priority to understand the other “messages” besides what has been sent or received by you.
Every email comes with a “Header” which is one part of an e-mail structure; call it DNA of the mail. It carries the basic fundamental information such as from whom the email comes, to whom it is addressed, date/time it was sent and the subject of the email. It is similar to an electronic postSeptemberk. Moreover, it also carries other detailed information which we usually don’t see.
This basic information comes in all brief/basic headers that most email programs automatically shows. This detail technical information can be viewed in a full header. All email programs can be set to show only brief header or full header and it is up to the users to set the program whether to view only “brief header” or “full header”.
Full header carries the information of the mail server’s name that the email passed through on its way to the recipient, and sender’s IP address and even the name of the email program and its version used.
Knowledge of this information is essential for analysis and investigation purposes on cases involving email abuse, spamming, harassment, forgeries and mail-bombing. It is worth mentioning, understanding of this tool would definitely help people to counter these attacks, and save themselves from unwarranted consequences. Well, this information could not be found in a brief header.
Here we will take the case of Google mail and Yahoo mail to find out the full header.
Google Mail.
Using your id/password, login to Gmail. Open the mail for which you wish to find the full header of the sender. Click on the inverted triangle placed just next to Reply.
You will get something like this…
Delivered-To: Mr.x@gmail.com
Received: by 10.36.81.3 with SMTP id e3cs239nzb; Tue, 12 September:11:47 -0800 (PST)
Return-Path:
Received: from mail.emailprovider.com (mail.emailprovider.com [111.111.11.111]) by mx.gmail.com with SMTP id h19si826631rnb.2007.03.12.15.11.46; Tue, 12 September:11:47 -0800 (PST)
Message-ID:
Received: from [11.11.111.111] by mail.emailprovider.com via HTTP; Tue, 12 September:11:45 PST
Date: Tue, 12 September:11:45 -0800 (PST)
From: Mr.y
Subject: Hello
To: Mr.x

In the example, headers are added to the message three times:
1. When Mr.y composes the email
Date: Tue, 12 September:11:45 -0800 (PST)
From: Mr .y
Subject: Hello
To: Mr.x
2. When the email is sent through the servers of Mr.y’s email provider, mail.emailprovider.com
Message-ID:
Received: from [11.11.111.111] by mail.emailprovider.com via HTTP; Tue, 12 September:11:45 PST
3.When the message transfers from Mr.y ’s email provider to Mr. x’s Gmail account
Delivered-To: Mr.x@gmail.com
Received: by 10.36.81.3 with SMTP id e3cs239nzb;Tue, 12 September:11:47 -0800 (PST)
Return-Path: Mr.y@emailprovider.com
Received: from mail.emailprovider.com (mail.emailprovider.com [111.111.11.111]) by mx.gmail.com with SMTP id h19si826631rnb; Tue, 12 September:11:47 -0800 (PST)
Below is a description of each section of the email header:
Delivered-To: Mr.x@gmail.com
The email address the message will be delivered to.
Received: by 10.36.81.3 with SMTP id e3cs239nzb;
Tue, 29 Mar:11:47 -0800 (PST)
The time the message reached Gmail’s servers.
Return-Path:
The address from which the message was sent.
Received: from mail.emailprovider.com
(mail.emailprovider.com [111.111.11.111])
by mx.gmail.com with SMTP id h19si826631rnb.2005.03.29.15.11.46;
Tue, 29 Mar:11:47 -0800 (PST)
The message was received from mail.emailprovider.com, by a Gmail server on March 29, 2005 at approximately 3 pm.
Message-ID:.62086.mail@mail.emailprovider.com
A unique number assigned by mail.emailprovider.com to identify the message.
Received: from [11.11.111.111] by mail.emailprovider.com via HTTP; Tue, 29 Mar:11:45 PST
Mr.y used an email composition program to write the message, and it was then received by the email servers of mail.emailprovider.com.
Date: Tue, 29 Mar:11:45 -0800 (PST)
From: Mr y
Subject: Hello
To: Mr.x
The date, sender, subject, and destination — Mr. Jones entered this information (except for the date) when he composed the email.
And for IP, look for Received:from followed by the IP within square brackets [ ] e.g.
Received: from [11.11.111.111] by mail.emailprovider.com via HTTP; Tue, 12
Also importantly, there are times when you might find multiple Received: from entries, in that case, please select the last one as the valid choice.

Hide or Change IP using Easy-Hide-Ip

Easy-Hide-Ip is a good and easy tool which has no spyware or malware.It gives all the basic options for a beginner.It show the loacation of an ip and helps you protect it or hide it when required.It changes to IP address to someother country as well sometimes,US,Germany,UK.It goes at random

This tool can be quite helpful in rapidshare downloading because you can change your IP regularly and download files each time from a different IP.this is not a freeware and is an evalution copy of 3 days but I’m providing you with the Easy-Hide-Ip Patch as well.
NOTE:-You have to configure your brower according to the software,which will be provided by the software itself.I have marked 4 arrows and the 4th is the one where you should click to check out your brower’s configuration.

Download: Easy-Hide-Ip v1.6 with Crack

Change your IP

on “Start” in the bottom left hand corner of screen
2. Click on “Run”
3. Type in “command” and hit ok

You should now be at an MSDOS prompt screen.

4. Type “ipconfig /release” just like that, and hit “enter”
5. Type “exit” and leave the prompt
6. Right-click on “Network Places” or “My Network Places” on your desktop.
7. Click on “properties”

You should now be on a screen with something titled “Local Area Connection”, or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on “Local Area Connection” and click “properties”
9. Double-click on the “Internet Protocol (TCP/IP)” from the list under the “General” tab
10. Click on “Use the following IP address” under the “General” tab
11. Create an IP address (It doesn’t matter what it is. I just type 1 and 2 until i fill the area up).
12. Press “Tab” and it should automatically fill in the “Subnet Mask” section with default numbers.
13. Hit the “Ok” button here
14. Hit the “Ok” button again

You should now be back to the “Local Area Connection” screen.

15. Right-click back on “Local Area Connection” and go to properties again.
16. Go back to the “TCP/IP” settings
17. This time, select “Obtain an IP address automatically”
tongue.gif 18. Hit “Ok”
19. Hit “Ok” again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back

How to Trace Any IP Address??

In my earlier post I had discussed about how to capture the IP address of a remote computer. Once you obtain this IP address it is necessary to trace it back to it’s source. So in this post I will show you how to trace any IP address back to it’s source. In fact tracing an IP address is very simple and easy than we think. There exists many websites through which you can trace any IP address back to it’s source. One of my favorite site is ip2location.com.

Just go to http://www.ip2location.com/demo.aspx and enter the IP address that you want to trace in the dialog box and click on “Find Location”‘. With just a click of a button you can find the following information for any given IP address.

1. Country in which the IP is located
2. Region
3. City
4. Latitude/Longitude
5. Zip Code
6. Time Zone
7. Name of the ISP
8. Internet Speed
9. Weather Station
10. Area Code and
11. Domain name associated with the IP address.

A sample snapshot of the results from ip2location.com is given below

You can also visually trace route any IP address back to it’s location. For this just visit http://www.yougetsignal.com/tools/visual-tracert/ and enter the IP you want to trace in the dialog box and hit the “Proxy Trace” button. Wait for few seconds and the visual trace route tool displays the path Internet packets traverse to reach a specified destination.

Get Email alerts on Your Mobile for FREE

Hi friends..last time I wrote about email alerts,it was only for Gmail users,but recently I stumbled across the wild wild web to find how to get my email alerts on my mobile (an old highly modded LG KG195), and the search was worth my time. I finally landed to WAY2SMS.COM which allowed me to send free sms all over India and even get email alerts on my mobile for free !!
Way2sms is a sms gateway provider which allows to send free sms across India,the sms are of 140 characters and consists of a 20 character advertisement through which the website covers its costs. Way2sms allows for seamless integration of Gmail, Yahoo accounts and you can chat from right at that site with your friends.
Well,that was a lot about way2sms,now lets learn how we can use to to get free email alerts on mobile -
First register at www.way2sms.com and login into the site.

Now click on Mail tab and create a new way2sms email ID.

After you have created it,login into your Gmail account/Yahoo account or in short Email account
Gmail Users
All you have to do is Just link your Gmail account with your Way2SMS account. Here is the way -

• Logon to your Gmail account
• click on settings & then click on ‘FORWARDING/POP/IMAP’ option
• Select “ Forward a copy of incoming mail to “ option & Enter your Way2SMS Email ID there which you just created

• Click On Save
• Finished. You will now receive alerts for every incoming mail that arrives in your Gmail id.

Yahoo Users
You only have to link your yahoo.co.in account with your Way2sms account,here is how you can do that -

• Logon to your Yahoo mail account
• click on Options & then click on “Mail Options”
• Select “ POP&Forwarding “ option & then Click on ‘Setup or Edit POP & Forwarding’ link.
• Choose ‘ Forwarding ‘ option & Enter your Way2SMS Mail ID

• Click On Save. You will now receive alerts for every incoming mail that arrives in your YAHOO.CO.IN Account.

Any Other Email Users
All you have to do is Just forward a copy of your mail to your Way2SMS Mail Id…and you will get free email alerts on your mobile.

The only downside of using this service is that you have to reactivate it every 7 days but that’s okay as it only takes the click of a button

I have been enjoying this service and just want to say that its awesome. You can send sms,create groups,send group sms,get email alerts on your mobile on the go..what else do you want? Why wait,just go ahead and get going ..

BSNL 3G hack

Here is a 100 % working trick to unlimited use BSNL 3G at the cost of
Normal GPRS

First of all Buy a normal 2g bsnl’s sim card and keep balance 50+ rs.
now activate gprs by sending sms GPRS PRE to 53733 It will be
actrivated in 24 hours, after activation get gprs settings by calling c.care

Now do e-recharge with 230 rs (or whatever unlimited plan exists in your area)
in it, After activation You have to chnage only one thing in yor 3G enabled cell.

Go to settings>tools>settings>phone&g
t;network>network mode> now select UMTS.

THEN do manual searching for network u will fing bsnl 3g network there wid small 3g logo along wid its name,select it as default

Now see your data singnals logo….. vola it is converted into 3G
You will get near about 500kbps to 1200 kbps speed
Remember use BSNLEGPRS or BSNLPREPAID as ur access point

but its 100% working
Enjoy 3G at minimum cost……

How to Hack ur friends mobile by making a duplicate sim?

let’s talk about the fun stuff. The first trick I will discuss is an activity that is becoming quite prevalant, SIM cloning. If you have paid attention to any cell phone related tutorials in the past, then you may remember cloning being made popular by certain public figures like Kevin Mitnick in order to place calls on the bill of another subscriber. Well, even with GSM this trick still holds relevant. How could such a flaw exist in a system that is obviously concentrated on preventing such fraudulant use? The flaw is within the COMP128 authentication algorithm used as an instantiation of A3/A8 widely used by gsm providers. Unfortunately for these providers, the COMP128 algorithm is just not strong enough to prevent fraud. We attack the algorithm by using a chosen-challenge attack, which works by forming a number of specially-chosen challenges and querying the SIM card for each one. Then by analyzing the responses from these queries, we are able to determine the value of the secret key that is used for authentication. So how do we perform this attack?

Well there are a few things you need before you start. First you will need to buy a SIM card reader, a card programmer, empty silver pic 2 card, and an unregulated adapter, and if you don’t have one a 9 pin male to female extension cable. You can probably put a bid on ebay for most of this hardware, or just google up some sites that sell them. You will also need some software for this trick. First you will need a SIM card editor. An excellent piece of software to use in this instance is Cardinal Sim Editor, which you can find (including the crack for it) at the below link…

http://www.cracksweb.com/news.php?go=824

Another tool you will is CardMaster, which once again you can find at the below link…

http://cardmaster.dk/download2.php

Finally what you will need is a SIM card emulator. An excellent example of an emulator to use is SIMEMU, which you can find at the below link…

http://simemu.cjb.net/

Note for those of you who feel the need to read the instructions on the site, just go to www.freetranslation.com to translate the web page from Spanish to English. Now let’s go ahead and get started shall we. You will first want to plug your SIM Reader into your com port. Then run Cardinal and then click where it says “Click Here” and then click Settings. You will then select your com/serial port and the baud rate. Then you will close this out, and then left click where it says “Click Here”, go to smartcard, and click SIM editor. The program will from there start up, and you will go to SIM, then SIM Info, and click the load button. After doing this you will see the IMSI code, take note of this code as you will need it. Now close the SIM Info and go to Security/Find key KI. When this window opens just click Start and wait. It will take approximately 4 hours to find the key. Once it is found take note of this KI and exit. Now you should have the IMSI and KI noted, if so lets continue with the next step. Now take your silver card. Within the unzipped file within you will find two files. SEE50s.hex (EEPROM) and SEF50sEN.hex (PIC). Now connect your programmer to a com port and go to the setup menu on your CardMaster program and choose the appropriate com port. You should then see a yellow rectangle at the bottom of the program that says that there is no card. Now insert your smartcard into the programmer, and the rectangle should change to green and you will see “Card ready”. Now go to where it says “Card type:” and select “Silvercard”. NOw go to the “File to Pic:” field and upload SEF50sEN.hex, then go to the “File to Eeprom:” field and upload SEE50s.hex. Now go to Edit and click “Auto Program”. Now once this is finished you will need to cut the card so that it will fit into the phone. Instructions for how the card needs to be cut is provided on the GSM solutions web site that will be listed in the Sites to Visit section at the bottom of this page. Now insert the newly cut silvercard into the phone. If it asks for

. If it asks for a pin just punch in 111. Then from the main menu open up “Sim-Emu”. Now from this menu go to Set Phone #, then -GSM #1 (or any slot), then Configure, then Edit #. Now edit GSM #X to any name, and then press ok. Now go to Config.Pos. and it will ask for PIN2, which will be 1234. It will then ask you what position you want the card to be, choose Position 1. It will then ask you for the IMSI, which you will punch in the IMSI you got from Cardinal. It will then ask you for the KI, which again you punch in the KI you got from Cardinal. It will then ask you to enter your PUK which can be anything up to 8 digits. Then it will ask you to enter your PIN which can be anything up to 4 digits. There you go, now you have cloned another SIM card, and are now free to call away all you want to on someone elses bill. There have also been rumors that on certain services there are ways to clone a SIM remotely, but none have been tested so this can’t be proven. So now that we’re finished talking about SIM cloning, let’s get into another trick involving exploiting gsm phones, bluejacking. What is bluejacking you ask? Bluejacking is exploiting the BlueTooth wireless communication system common among PDAs, cell phones, and of course laptops. In essense this is nothing more than a harmless little prank, similar to defacing web sites. For bluejacking gsm phones what we are trying to do is first create a phonebook contact that says something like “haha I haxor3d j00r ph0n3!”, and then send it to any bluetooth enabled device in the facinity. This in essense amounts up to at most a harmless little prank, but it’s fun to watch their faces when they get the message. However, I won’t bother explaining the details of how to bluejack, since the methods are models and manufacturer dependant, and are explained on a site that will be listed at the bottom of this tutorial. Don’t believe that the possibilities for exploiting bluetooth enabled gsm phones ends there though. Another activity that we can jump onto is called bluebugging.

Bluebugging is the process of sniffing out communication from a bluetooth-enabled cell phone. Like, for example, sms messages. Yup, now you can sit in a coffee shop, open up your laptop, and spy on everyone else who is using their phone. This concept was first introduced to the world in a presentation at DefCon 11, and is now available to the public in the form of a tool called BlueSniff that works as a bluetooth wardriving utility to play big brother. Go to the below address to get a copy of this tool…

http://bluesniff.shmoo.com/bluesniff-0.1.tar.gz

Another nice tool to use for such means is btscanner, which can be used to gather as much information as possible on a bluetooth-enabled device. Yet again, this wonderful tool can be found at the below address…

http://www.pentest.co.uk/src/btscanner-1.0.tar.gz

">(Warning do it ur known risk)

Hack A Mobile Using Bluetooth (Super Bluetooth Hack v1.08 )

Okay, I guess you have probably heard of SBH Or BT Info before…No?
Okay Then Let Me tell you what it is about:

Please note that this is for educational purposes ONLY
Once connected to a another phone via bluetooth you can call many functions.
- read his messages
- read his contacts
- change profile
- play his ringtone even if phone is on silent
- play his songs(in his phone)
- restart the phone
- switch off the phone
- restore factory settings
- change ringing volume
- And here comes the best
“Call from his phone” it includes all call functions like hold etc.
Notes:
1.) When connecting devices use a code 0000
2.) At start of programm on smartphones do not forget to turn on bluetooth before start of the application.
**************************************************
HOW TO INSTALL SUPER BLUETOOTH HACK
{1} Open wap.GetJar.com with your mobile
{2} Click Quick Download and enter Quick Download Code 28863
OR
{1} Download Super Bluetooth Hack Here
JAD file (super blue tooth hack v1.8.jad)
JAR file (super blue tooth hack v1.8.jar) Size: 110.65 Kb
http://rapidshare.com/files/115057757/3153SBH.v1.07.rar
Mirror2:
http://w15.easy-share.com/1700388821.html
Mirror3:
http://www.megaupload.com/?d=EZ3J4ILB
Mirror4:
http://www.mediafire.com/?jsnogmwnxvx
Pass: www.dl4all.com
{2} Send It To your Mobile Using a data Cable/Bluetooth dongle

How To Hack A Computer

There is a far better way to get into Windows XP. It is easy and it does not reset the password. Hack into a computer running Windows XP without changing the password and find out all and any passwords on the machine (including admin accounts). You do not need access to any accounts to do this. Of course, do not do this on anyone elses computer without proper authorisation.

Steps to Hack into a Windows XP Computer without changing password:
1. Get physical access to the machine. Remember that it must have a CD or DVD drive.

2. Download DreamPackPL HERE.
3. Unzip the downloaded dpl.zip and you’ll get dpl.ISO.
4. Use any burning program that can burn ISO images.
5. After you have the disk, boot from the CD or DVD drive. You will see Windows 2000 Setup and it will load some files.
6. Press “R” to install DreamPackPL.
7. Press “C” to install DreamPackPL by using the recovery console.
8. Select the Windows installation that is currently on the computer (Normally is “1″ if you only have one Windows installed)
9. Backup your original sfcfiles.dll by typing:
“ren C:\Windows\System32\sfcfiles.dll sfcfiles.lld” (without quotes)
10. Copy the hacked file from CD to system32 folder. Type:
“copy D:\i386\pinball.ex_ C:\Windows\System32\sfcfiles.dll” (without quotes and assuming your CD drive is D:)
11. Type “exit”, take out disk and reboot.
12. In the password field, type “dreamon” (without quotes) and DreamPack menu will appear.
13. Click the top graphic on the DreamPack menu and you will get a menu popup.

14. Go to commands and enable the options and enable the god command.

15. Type “god” in the password field to get in Windows.
You can also go to Passwords and select “Logon with wrong password and hash”. This option allows you to login with ANY password.
Note: I was unable to bring up the DreamPackPL for the first time because I have Kaspersky Anti-Virus already running in background. I believe most antivirus already labelled this tool as a Hack-Tool. A Hack-Tool is NOT a virus. DreamPackPL helps you bypass the Windows Login screen and it is not destructive.

How To Get Adsense On My Blog?

Let me start this topic with a conversation with my online friend (name withheld for personal reasons) :

Friend : Hi Govinda! Need some help bro

Me : Yes, what help do you need bro?

Friend : Actually, I am going broke. Dad’s not giving me enough money. I took a free co.cc domain and blogged for 2 days and applied for Adsense. But Adsense flatly refused my application. All my posts were original. What should I do?

Me : LOL Wait till I write a article on my site, then you will understand where you went wrong. You, like other new bloggers, have taken Adsense for granted.

Most of the bloggers (basically, even I) took to blogging just for Adsense. People make the mistake of linking money with Adsense. They think that all they need is a few posts (which they do by copy pasting or intelligent ones spin those articles). Day by day, the adsense policies are getting stricter. As of now, these are the compulsory requirements for getting Adsense approved on your website.

• Buy a Top Level Domain :

Many new bloggers make this mistake. Moments after making the decision of blogging, they head over to blogspot and get a free blog. Some of them try taking co.cc domains and host it on a free hosting. My dear friend, you need to a bit more professional when you think of earning money. You strictly need a Told Level Domain. The best top level domain is “.com” domain. Just head over to some domain registrar and go get one for just about $9. You can even get coupon codes that give free domain for first year or domain for just $1 only. All you need is a bit of Google searching.

• Age Of Website :

For your website to be qualified for Adsense, you need a good aged website. Your blog must be minimum 6 months old before you can apply for Adsense.

• Write Original Content :

Who would like copied articles? Same is the case with Adsense. These guys have advanced checkers that can easily detect whether the articles are authentic or just some copy paste. Your site can only have content that agree to Google Adsense’s policy. Hacking tutorials or tricks are a strict no no. In a word, everything that you post should be LEGAL. Also, just having a few original articles won’t do the trick. You must have atleast 50-60 originals before you think of applying.

• Having Some IMPORTANT Pages :

Your website must have important pages like Privacy Policy and Terms Of Use. Such things elevate the level of professionalism of your website and can impress the people at Google. Also, tend to AVOID popups like subscription boxes on the home page. This shows that you are making the website for only making profits and not sharing information.

• Traffic :

Traffic is definitely a important criterion for getting Adsense. Adsense will never accept your site if you have very less traffic because they will stand at a loss. Low traffic website owners sometimes do illegal things like ‘click exchange’ which results in losses for both Adsense and the websites who advertise on Adsense. So you need to have a site that generates constant traffic.

Just make a small checklist and try to assess your website with the following points. I am sure you must be getting rejected because you don’t comply to one of the terms. Enjoy blogging!

Hack Gmail Password Using Gmail Hacker

Here is one more awesome Gmail hacking software useful to hack Gmail account password – Gmail Hacker. This Gmail hacker is one of my favorite software to hack Gmail password. The only thing you have to do is to build your own Gmail hacker and send this Gmail hacker to the victim. Gmail can be even hacked using Ardamax keylogger or Winspy keylogger. I have provided software download link to download Gmail hacker…. just read on.

Gmail Hacker – Software to hack Gmail password :

1. Download Gmail hacker software to hack Gmail password.
2. Download Winrar (free download here) to obtain and unlock Gmail hacker folder.

3. Now, run Gmail Hacker Builder.exe file on your computer to see :

4. Enter in your email address and password (I recommend you to create new Gmail id for this : highly recommended) and hit on Build. Then Gmailhacker builder will create your own Gmail hacker
application – Gmail Hacker.exe file which you can use to hack gmail password.

5. Now, send this Gmail Hacker.exe file to victim whose you wanna hack Gmail password and tell him that this Gmail hacker is used to hack Gmail password. Ask him to run Gmail Hacker.exe and enter all information (which includes his Gmail id and password plus Gmail id of victim he wanna hack).

6.As he enters this information and hits “Hack Them”, he will receive error message as shown.

7. In return, you will receive an email in your email account like this :

8. So, you will now have his Gmail password and ready to hack Gmail password. Thus, Gmail hacker software is used to hack gmail password.
So guys, I hope you have got the method of how to use Gmail hacker to hack Gmail password. This Gmail hacker is 100% working (provided victim falls for it). Just try out this Gmail hacker to hack Gmail password. If you have any problem in using Gmail Hacker and hack Gmail password, just mention it in comments.

Hacking Gmail

A couple of days ago I find an anthor great hacking (e)bookwhich teaches us how to hack gmail it is available for download And it is absoloutely free..

The first book to unlock the true power behind Gmail, Hacking Gmail will immediately appeal to Google and Gmail fans
* This is serious, down-and-dirty, under-the-hood, code-level hacking that will have readers eliminating the default settings, customizing appearance, disabling advertising, and taking control over their Gmail accounts
* Covers turning Gmail into an online hard drive for backing up files, using it as a blogging tool, and even creating customized Gmail tools and hacks.
* Shows readers how to check their Gmail without visiting the site; use Gmail APIs in Perl, Python, PHP, and other languages, or create their own; and maximize Gmail as a host for message boards, photo galleries, even a blog.

DOWNLOAD

Hack Youtube Account Phishing

PROCEDURE:

1.once you have downloded youtube fake login page,now extract contents in a folder
2.In that ,find (CTRL+F) ‘http://hackingaday.com’ then change it to your destined URL but don’t forget ‘\’.
Save it .
3.Open Fake page in wordpad
4.Now press ctrl+F and search for the term “action=” now change its value to pass.php i.e. action=pass.php
5.Create an id in www.110mb.com , because i know about that site quite well.

6.Then upload the contents into a directory

7.For that,after creating an id you should go to file manager and upload all these files.

8.Then just got to youtube.htm and try out whether its working .
After you type in the file , a password file named pass.txt will be created in the same directory.Then you can see what username and password you have entered.

How to create a bootable Windows XP SP1 CD (Nero):

How to create a bootable Windows XP SP1 CD (Nero):

Step 1

Create 3 folders - C:\WINXPSP1, C:\SP1106 and C:\XPBOOT

Step 2

Copy the entire Windows XP CD into folder C:\WINXPSP1

Step 3

You will have to download the SP1 Update, which is 133MB.
Rename the Service Pack file to XP-SP1.EXE
Extract the Service Pack from the Run Dialog using the command:
C:\XP-SP1.EXE -U -X:C:\SP1106

Step 4

Open Start/Run... and type the command:
C:\SP1106\update\update.exe -s:C:\WINXPSP1

Click OK

Folder C:\WINXPSP1 contains: Windows XP SP1



How to Create a Windows XP SP1 CD Bootable

Step 1

Download xpboot.zip
Code:
Code:
http://thro.port5.com/xpboot.zip

( no download manager !! )

Extract xpboot.zip file (xpboot.bin) in to the folder C:\XPBOOT

Step 2

Start Nero - Burning Rom.
Select File > New... from the menu.
1.) Select CD-ROM (Boot)
2.) Select Image file from Source of boot image data
3.) Set Kind of emulation: to No Emulation
4.) Set Load segment of sectors (hex!): to 07C0
5.) Set Number of loaded sectors: to 4
6.) Press the Browse... button



Step 3

Select All Files (*.*) from File of type:
Locate boot.bin in the folder C:\XPBOOT

Step 4

Click ISO tab
Set File-/Directory length to ISO Level 1 (Max. of 11 = 8 + 3 chars)
Set Format to Mode 1
Set Character Set to ISO 9660
Check all Relax ISO Restrictions




Step 5

Click Label Tab
Select ISO9660 from the drop down box.
Enter the Volume Label as WB2PFRE_EN
Enter the System Identifier as WB2PFRE_EN
Enter the Volume Set as WB2PFRE_EN
Enter the Publisher as MICROSOFT CORPORATION
Enter the Data Preparer as MICROSOFT CORPORATION
Enter the Application as WB2PFRE_EN

* For Windows XP Professional OEM substitute WB2PFRE_EN with WXPOEM_EN
* For Windows XP Home OEM substitute WB2PFRE_EN with WXHOEM_EN

Step 6

Click Burn tab
Check Write
Check Finalize CD (No further writing possible!)
Set Write Method to Disk-At-Once

Press New button

Step 7

Locate the folder C:\WINXPSP1
Select everything in the folder and drag it to the ISO compilation panel.
Click the Write CD Dialog button.

Press Write

You're done.