Getting IP Address of victim computer to hack/access computer remotely

The tutorial also mentions about obtaining IP Address of victim computer over msn.

Getting Ip Address:-

To see the ip all computers you are connected to (web servers, people attempting to hack into your computer).
Go to dos (start>run>type command) and run the netstat command. Type netstat /? for details.
Type netstat -r at the command prompt to see the ip of all computers you are connected to

In MSN (and other programs) when you are chatting to someone everything you type goes through the MSN servers first (they act as a proxy) so you see their ip rather than who you are chatting to. You can get round this by sending them a file as MSN doesn't send file through its proxy.

~`;! IP HIDER !;`~

IP HIDER 3.7 full+ license key


ip hider is a great tool that have lots of working proxy's. i found got a license key. i was searching it for a year. all of a sudden, i got a free one. heres the email i got from a company.----------------------------------------------------------------------------
Dear Mr./Mrs. ajobbalok,

This email contains your 6 months license key for IP Hider version 3.7.This license key is valid only for version 3.7 so please make sure that you have this version installed.Please follow these steps to register:

1. Make sure that you have the trial version of the software installed. In order to verify this please go to Start / All Programs / IP Hider. If the IP Hider is present that means that you have the software installed, otherwise please download and install the latest version of the application from http://www.allanonymity.com.

2. Considering that the software is installed there are two situations:

- The trial copy is expired. In this case after you start the application - you will be promoted to Buy, Uninstall or Register the software. Press Register and the registration form will start. Copy and paste the licensing information below and press OK.
- The trial copy is not expired. In this case the user interface will start normally and you should go to Register menu, the registration form will be displayed. Copy and paste the licensing information below and press Register.

3. Your license information is below. Copy and paste into the registration form only the bolded strings:

- email: ajobbalok@gmail.com" onclick="window.open(this.href);return false
- registration key: 3X6Z24NBYE29747U95QAE76PWRL347KP42KWC75U8S7WAA3CRG 8QRSD9BNDE9W9LXW8P78STGXSKJURZ​84Y5AM5YNVKA43WNR8D RKE

4. If the license key is valid, after you copy and paste the license information (email and registration key) into the registration form and press OK or Register, you should see that your copy is registered. You will also see your email address and license expiration date.

5. If you see this information then the registration process is completed.

For any technical problem please do not hesitate to contact our support team at this e-mail address: E-mail.


AllAnonymity Team
---------------------------------------------------------------------------

Hope you will enjoy your six months key!

http://rapidshare.com/files/214338187/iphider37se.exe

Change Your Ip In Less Then 1 Minute

How To: Change Your Ip In Less Then 1 Minute

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back

Get Location Of Anyone On Internet

Let’s say you want to hack your friend’s computer. Well the first and the essential thing to do (of course if you’re hacking over the Internet) is to find out his IP address. There are several methods of doing it but here’s an easy one. The only thing you have to do is to actually make your friend click a link you send him. When that person clicks the link, you will receive information likeIP Address, Country, Host name, Operating System /Browser Details and region name . Just follow instructions below:

Go to this link , here you have to type in your email address. Afterwards you’ll get a unique link that looks kinda like this one here http://acmepeers.com/?u=vyg. When someones clicks that link you will receive tracing reports to your email .

It looks like this .

This method will not work if the person whose information you want to get is using a proxy server.
Then you will get false information.

How do I change my IP address?

Every time we connect to the internet we get a certain IP address provided to us by our ISP(Internet Service Provider). This IP stays the same until we disconnect from the internet. So if you want to change your IP just disconnect and connect again.

But the problems starts if you have a Cable/DSL router. Some ISP-s set those routers in a so called routing mode, so that the IP cannot be changed manually by user, but rather by the ISP himself after 24 hours. There are two way of changing your IP address when your router is in a routing mode. The first way is just to go to your router, plug it out and after a few seconds, plug it back in. But what if we don’t want to get up from our chairs and go to the router every time we want to change our IP and we all want to do it with a command from our pc? The procedure goes like this;

Open START>RUN and type in cmd;

In the command prompt type in ipconfig, push enter and a list of ip-s will be visible…

In this list above the adapter is Local Area Connection. That is because the router is not wireless. If you use a wireless router, your adapter will be a Wireless. So, in this picture there are three IP addresses. The one we need is the default gateway. The default gateway is actually the IP of our router. We’ll just copy that IP and paste it into the address bar of your web browser(IE, Firefox etc…).

Now we are actually trying to enter the router. There will be a welcome screen with a username and a password for entering the router. It is usually admin or user for the username and 0000 for the password but if that does not work, just google your router brand and you’ll easily find it(or contact your ISP for it). When you click OK, you are in the router. Here you can do all kinds of stuff, depending on which router you have. But the thing we need to find is the connect/disconnect button. It is probably under Status or a tab similar to that(it is different with every router). You just click the button and the router will do the thing he does every 24 hours. Now, just connect back and that’s it, you have a new IP address.

IP How

Before you can change your IP you need some information. This information includes your IP range, subnet mask, default gateway, dhcp server, and dns servers.


1. Getting your IP range - Getting information about your IP range is not difficult, I recommend using Neo Trace on your own IP. But for my test just look at your IP address, say it's 24.193.110.13 you can definitely use the IP's found between 24.193.110.1 < [new IP] < 24.193.110.255, don't use x.x.x.1 or x.x.x.255. To find your IP simply open a dos/command prompt window and type ipconfig at the prompt, look for "IP Address. . . . . . . . . . . . : x.x.x.x".


2. Subnet Mask, Default Gateway, DHCP Server - These are very easy to find, just open a dos/command prompt window and type 'ipconfig /all' without the ' '. You should see something like this:

Windows IP Configuration:

Host Name . . . . . . . . . . . . . . : My Computer Name Here
Primary Dns Suffix . . . . . . . . . :
Node Type . . . . . . . . . . . . . . .: Unknown
IP Routing Enabled. . . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . . . . . . .: xxxx.xx.x
Description . . . . . . . . . . . . . . . . . . . . : NETGEAR FA310TX Fast Ethernet Adapter (NGRPCI)
Physical Address. . . . . . . . . . . . . . . . . : XX-XX-XX-XX-XX-XX
Dhcp Enabled. . . . . . . . . . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . . . . . . : Yes
IP Address. . . . . . . . . . . . . . . . . . . . . : 24.xxx.xxx.xx
Subnet Mask . . . . . . . . . . . . . . . . . . . .: 255.255.240.0
Default Gateway . . . . . . . . . . . . . . . . . : 24.xxx.xxx.x
DHCP Server . . . . . . . . . . . . . . . . . . . .: 24.xx.xxx.xx
DNS Servers . . . . . . . . . . . . . . . . . . . . : 24.xx.xxx.xxx
24.xx.xxx.xx
24.xx.xxx.xxx
Lease Obtained. . . . . . . . . . . . . . . . . . .:Monday, January 20, 2003 4:44:08 PM
Lease Expires . . . . . . . . . . . . . . . . . . . .:Tuesday, January 21, 2003 3:43:16 AM


This is all the information you will need for now, I suggest you either keep your dos/command prompt window open or copy & paste the information somewhere, to copy right click the window and select text and click once.



III. Changing your IP Address


To change your IP address first pick any IP you like out of your IP range and remember it or write it down. It is usualy a good idea to make sure the IP is dead (except for what we are going to do later on) so just ping it via "ping x.x.x.x" and if it times out then you can use it. Now go to My Computer, then Control Panel. In Control Panel select Network Connections and pick your active connection, probably Local Area Connection or your ISP name. Open that connection by double clicking on the icon in Network Connections, then select Properties under the General Tab. In the new window that pops up select Internet Protocol (TCP/IP) and click properties, it's under the general tab. In this new window select the General tab and choose "Use the following IP address" and for the IP address enter the IP you would like to use (the one you picked from your subnet earlier) and for the Subnet Mask enter the subnet mask you got when your ran ipconfig /all, same goes for the Default Gateway. Now select "Use the following DNS server addresses" and enter the information you got earlier. Now just click OK. Test that it worked, try to refresh a website and if it works you know everything is okay and you are connected. To make sure the change worked type ipconfig again and the IP address should have changed to your new one.



IV. DDoS & DoS Protection


If your firewall shows that you are being DDoSed, this is usually when you are constantly getting attempted UDP connections several times a second from either the same IP address or multiple IP addresses (DDoS), you can protect your self by changing your IP address via the method I described above.



V. Web servers & Other Services


If you know someone on your IP range is running a web server and he or she has pissed you off or you just like messing around you can "steal" their IP address so any DNS going to that IP will show your site instead because you would be running a web server yourself.

To "steal" an IP is to basically use the changing IP address method above and picking an IP that someone that is running a web server has in use. Often you will be able to keep that IP at least for some time, other times you wont be able to use it so just keep trying until it works. You your self will need to have a web server on the same port with your message. You can do this with other services too. You can also DoS or DDoS the IP address you are trying to steal to kick him off the net, but I don't recommend as its pretty illegal, an your ISP will get pissed ;)

IP Searcher 2.2

IP Address Searcher is a powerful IP Address Search tool that helps you to search IP address, list all IP Address on your network, ping a host, trace IP, get MAC information, search a ip geographic location.
Features:

1).List ALL IP address of PCs on network.

2).Get IP address of a specific host or a website.

3).Get host name of a specific IP address.

4).PING a specific host or a website, display it’s geographic location and IP network segment.

5).Trace a specific host or website, and display the location of routes and display it’s location and IP network segment.

6).Get ALL netcard(MAC) information on your computer.

Download Here

Find MAIL SENDERs IP

Emails are very important part of our communication system
We think that we know everything about emails.

we know how to compose email , how to attach a file , how to send it to others ,How to receive emails from others and many other things.This is all we know about emails.But this is not end of it .When you receive or send emails many other things are sent with it.
At this time when Email is progressively used for business and for many purposes, not to mention it is being used for phishing and other malicious intentions. It is of utmost priority to understand the other “messages” besides what has been sent or received by you.
Every email comes with a “Header” which is one part of an e-mail structure; call it DNA of the mail. It carries the basic fundamental information such as from whom the email comes, to whom it is addressed, date/time it was sent and the subject of the email. It is similar to an electronic postSeptemberk. Moreover, it also carries other detailed information which we usually don’t see.
This basic information comes in all brief/basic headers that most email programs automatically shows. This detail technical information can be viewed in a full header. All email programs can be set to show only brief header or full header and it is up to the users to set the program whether to view only “brief header” or “full header”.
Full header carries the information of the mail server’s name that the email passed through on its way to the recipient, and sender’s IP address and even the name of the email program and its version used.
Knowledge of this information is essential for analysis and investigation purposes on cases involving email abuse, spamming, harassment, forgeries and mail-bombing. It is worth mentioning, understanding of this tool would definitely help people to counter these attacks, and save themselves from unwarranted consequences. Well, this information could not be found in a brief header.
Here we will take the case of Google mail and Yahoo mail to find out the full header.
Google Mail.
Using your id/password, login to Gmail. Open the mail for which you wish to find the full header of the sender. Click on the inverted triangle placed just next to Reply.
You will get something like this…
Delivered-To: Mr.x@gmail.com
Received: by 10.36.81.3 with SMTP id e3cs239nzb; Tue, 12 September:11:47 -0800 (PST)
Return-Path:
Received: from mail.emailprovider.com (mail.emailprovider.com [111.111.11.111]) by mx.gmail.com with SMTP id h19si826631rnb.2007.03.12.15.11.46; Tue, 12 September:11:47 -0800 (PST)
Message-ID:
Received: from [11.11.111.111] by mail.emailprovider.com via HTTP; Tue, 12 September:11:45 PST
Date: Tue, 12 September:11:45 -0800 (PST)
From: Mr.y
Subject: Hello
To: Mr.x

In the example, headers are added to the message three times:
1. When Mr.y composes the email
Date: Tue, 12 September:11:45 -0800 (PST)
From: Mr .y
Subject: Hello
To: Mr.x
2. When the email is sent through the servers of Mr.y’s email provider, mail.emailprovider.com
Message-ID:
Received: from [11.11.111.111] by mail.emailprovider.com via HTTP; Tue, 12 September:11:45 PST
3.When the message transfers from Mr.y ’s email provider to Mr. x’s Gmail account
Delivered-To: Mr.x@gmail.com
Received: by 10.36.81.3 with SMTP id e3cs239nzb;Tue, 12 September:11:47 -0800 (PST)
Return-Path: Mr.y@emailprovider.com
Received: from mail.emailprovider.com (mail.emailprovider.com [111.111.11.111]) by mx.gmail.com with SMTP id h19si826631rnb; Tue, 12 September:11:47 -0800 (PST)
Below is a description of each section of the email header:
Delivered-To: Mr.x@gmail.com
The email address the message will be delivered to.
Received: by 10.36.81.3 with SMTP id e3cs239nzb;
Tue, 29 Mar:11:47 -0800 (PST)
The time the message reached Gmail’s servers.
Return-Path:
The address from which the message was sent.
Received: from mail.emailprovider.com
(mail.emailprovider.com [111.111.11.111])
by mx.gmail.com with SMTP id h19si826631rnb.2005.03.29.15.11.46;
Tue, 29 Mar:11:47 -0800 (PST)
The message was received from mail.emailprovider.com, by a Gmail server on March 29, 2005 at approximately 3 pm.
Message-ID:.62086.mail@mail.emailprovider.com
A unique number assigned by mail.emailprovider.com to identify the message.
Received: from [11.11.111.111] by mail.emailprovider.com via HTTP; Tue, 29 Mar:11:45 PST
Mr.y used an email composition program to write the message, and it was then received by the email servers of mail.emailprovider.com.
Date: Tue, 29 Mar:11:45 -0800 (PST)
From: Mr y
Subject: Hello
To: Mr.x
The date, sender, subject, and destination — Mr. Jones entered this information (except for the date) when he composed the email.
And for IP, look for Received:from followed by the IP within square brackets [ ] e.g.
Received: from [11.11.111.111] by mail.emailprovider.com via HTTP; Tue, 12
Also importantly, there are times when you might find multiple Received: from entries, in that case, please select the last one as the valid choice.

Hide or Change IP using Easy-Hide-Ip

Easy-Hide-Ip is a good and easy tool which has no spyware or malware.It gives all the basic options for a beginner.It show the loacation of an ip and helps you protect it or hide it when required.It changes to IP address to someother country as well sometimes,US,Germany,UK.It goes at random

This tool can be quite helpful in rapidshare downloading because you can change your IP regularly and download files each time from a different IP.this is not a freeware and is an evalution copy of 3 days but I’m providing you with the Easy-Hide-Ip Patch as well.
NOTE:-You have to configure your brower according to the software,which will be provided by the software itself.I have marked 4 arrows and the 4th is the one where you should click to check out your brower’s configuration.

Download: Easy-Hide-Ip v1.6 with Crack

Change your IP

on “Start” in the bottom left hand corner of screen
2. Click on “Run”
3. Type in “command” and hit ok

You should now be at an MSDOS prompt screen.

4. Type “ipconfig /release” just like that, and hit “enter”
5. Type “exit” and leave the prompt
6. Right-click on “Network Places” or “My Network Places” on your desktop.
7. Click on “properties”

You should now be on a screen with something titled “Local Area Connection”, or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on “Local Area Connection” and click “properties”
9. Double-click on the “Internet Protocol (TCP/IP)” from the list under the “General” tab
10. Click on “Use the following IP address” under the “General” tab
11. Create an IP address (It doesn’t matter what it is. I just type 1 and 2 until i fill the area up).
12. Press “Tab” and it should automatically fill in the “Subnet Mask” section with default numbers.
13. Hit the “Ok” button here
14. Hit the “Ok” button again

You should now be back to the “Local Area Connection” screen.

15. Right-click back on “Local Area Connection” and go to properties again.
16. Go back to the “TCP/IP” settings
17. This time, select “Obtain an IP address automatically”
tongue.gif 18. Hit “Ok”
19. Hit “Ok” again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back

How to Trace Any IP Address??

In my earlier post I had discussed about how to capture the IP address of a remote computer. Once you obtain this IP address it is necessary to trace it back to it’s source. So in this post I will show you how to trace any IP address back to it’s source. In fact tracing an IP address is very simple and easy than we think. There exists many websites through which you can trace any IP address back to it’s source. One of my favorite site is ip2location.com.

Just go to http://www.ip2location.com/demo.aspx and enter the IP address that you want to trace in the dialog box and click on “Find Location”‘. With just a click of a button you can find the following information for any given IP address.

1. Country in which the IP is located
2. Region
3. City
4. Latitude/Longitude
5. Zip Code
6. Time Zone
7. Name of the ISP
8. Internet Speed
9. Weather Station
10. Area Code and
11. Domain name associated with the IP address.

A sample snapshot of the results from ip2location.com is given below

You can also visually trace route any IP address back to it’s location. For this just visit http://www.yougetsignal.com/tools/visual-tracert/ and enter the IP you want to trace in the dialog box and hit the “Proxy Trace” button. Wait for few seconds and the visual trace route tool displays the path Internet packets traverse to reach a specified destination.